Reelmaster® 3555-D (03820)

Armrests	Standard
Battery	12V
Bedknife Adjustment	Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to reel adjustment.
Blade Style/Type	Reel
Blade Type (Description)	EdgeSeries™ DPA radial or forward swept reels.
Clip Frequency/Backlapping	5″ reel 2,350 (+/- 150) rpm max reel speed, at highest setting. 200 rpm max at low idle and lowest setting for backlapping.
Controls	Foot operated controls: Forward and reverse traction pedal, mow/transport speed limiter. Hand operated on control panel: Parking brake lever, ignition switch, engine throttle lever, LED headlight switch, on/off switch for cutting units, joystick for cutting unit lift and lower. Other controls: Steering wheel tilt control, reel speed control, backlap engagement lever.
Cooling System Description	Aluminum side-by-side oil cooler/radiator. 8.5 fins per inch, wavy fin, non-louvered. 5.25 quart (4.9 liter) capacity.
Cup Holder	Standard
Cutting Unit Accessories	Rear Roller Brush Kit, Universal Groomer, Broomer, Grass Baskets
Cutting Unit Lift/Lower	Hydraulic – front and rear cutting unit lift/lower are sequenced for uniform starting and ending points.
Cutting Unit Type/Configuration	Five hydraulically driven, balanced, DPA cutting Units. Frame precision manufactured, die-cast aluminum for increased strength, simple click adjustment maintenance.
Drivetrain	Diesel
Electrical System	Heavy-duty 12-volt battery, 570 CCA; 40 amp alternator/regulator. Electronic control unit is microprocessor based, solid state control unit with diagnostic capabilities.
Engine Cooling	Liquid Cooled
Fuel / Power Source	Diesel / Biodiesel
Fuel Capacity	7.5 U.S. gal. (28.4 L)
Fuel Filter	10 micron spin-on filter with integral water separator.
Gauges/Instrumentation	Hour meter, fuel gauge, diagnostic lamp, cluster gauge with glow plug and charge indicator lights. Low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off).
Ground Speed – Forward	0 – 10 mph (0 – 16.1 km/h)
Ground Speed – Reverse	0 – 3.5 mph (0 – 5.6 km/h)
Height	79″ (200 cm)
Height of Cut Range	8-Blade: 0.5″ – 1.5″ (13 mm – 38 mm) 11-Blade: 0.25″ – 0.75” (6 mm -19 mm)
Hydraulic Fluid Capacity	6 U.S. gal. (22.7 L)
Hydraulic Fluid Type	Toro PX™ Extended Life Hydraulic Fluid
IntelliDash™ Capable	Yes
Interlocks	Traction pedal neutral, parking brake, operator presence in seat, and cutting unit engage/disengage safety interlock switches.
Lighting	Standard
Main Frame/Chassis	Formed steel, welded steel and steel tubing.
Max Slope Angle	Refer to operator’s manual.
Mowing Speed	0 – 7 mph (0 – 11.3 km/h)
Number of Blades	11, 8
Oil Capacity	3.5 U.S. qt. (3.3 L)
Oil Cooler Description	Pressurized lubrication system.
Optional Accessories	Sunshade (with optional operator cooling fan, LED work lights, rotating amber beacon)
Overall Width	112″ (274 cm)
Parking/Service Brakes	Hydrostatic service brake. Hand-operated parking brake.
Power Steering	Yes
Power Train (Engine Description)	Kubota® liquid-cooled diesel, 3-cylinder, 24.8 hp (18.5 kW) @ 3000 RPM. Engine governed to 3220 RPM high idle (± 50 RPM), 1400 RPM low idle (± 50 RPM). Displacement: 68.5 cu. in. (1123 cc). Peak torque: 57.2 lbs-ft @ 2200 RPM. Tier 4 and Stage V compliant.
Product Length	105″ (266 cm)
Reel Diameter	5 in. (12.7cm)
Reel/Cylinder Drive	Hydraulic
Rollers	Wiehle front roller and standard rear roller included. Optional front full and shoulder rollers, and short and long rear rollers available.
Safety/Operator Safety	2-post ROPS and retractable seat belts standard.
Seat	Two-piece premium commercial two-tone grey vinyl with two armrests, mechanical suspension standard.
Starting	Switch
Steering System Description	Hydraulic power steering, tilt wheel.
Tires – Front	22″ x 12″ – 12″, 4-ply, No Tread
Tires – Rear	22″ x 12″ – 12″, 4-ply, No Tread
Tool Box	Standard
Traction Drive	3WD
Traction Drive (System)	Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive provides infinitely variable speed in forward and reverse.
Transport Width	91″ (231 cm)
Weight	1,655 lbs. (751 kg) with no cutting units. 2,280 lbs. (1,034 kg) with (5) 5″ reels, 22″ width, 8-blade cutting units.
Width of Cut	100″ (254 cm)

Call for Pricing

Similar Products

Reelmaster® 7000 (03780)

Reelmaster® 5010-H (03950)

Reelmaster® 3575-D (03821)

Reelmaster® 3550 (03910)

Reelmaster 5610-D (03956)

Reelmaster 5510-D (03954)

Reelmaster 5410-D (03952)