Groundsmaster® 3500-D (30807)

Air Filter	Remote-mounted 5″ Donaldson® air cleaner
Armrests	Standard
Battery	12V
Blade Style/Type	Rotary
Blade Type (Description)	Combination Blades: 27″ (68.6 cm) long, 2.5″ (6.4 cm) wide, 0.25″ (0.64 cm) thick
Cab Unit	N/A
Controls	Forward and reverse traction control pedals; mow/transport foot lever; hand activated parking brake; hand operated ignition key switch; tilt steering wheel lock; PTO switch; throttle; joystick control for deck raise and lower; cutting deck transport lock.
Cooling System Description	Rear-mounted, cross flow 4-row radiator
Cup Holder	Standard
Cutting Unit Accessories	Mulching Kit, Sectional Roller, Roller Scraper Kit
Cutting Unit Lift/Lower	Joystick control for deck raise and lower
Cutting Unit Type/Configuration	Three Contour™ Plus 27″ (69 cm), rear-discharge rotary with standard full-length striping rear rollers on each deck. Sidewinder® system allows all three decks to slide right and left 12″ (30 cm) of center, 24″ (61 cm) total travel. 68″ (173 cm), standard and 72″ (183 cm) optional. Deck overhang for trimming is 12″ (30.5 cm) @ 68″ (173 cm) width of cut and 14″ (35 cm) @ 72″ (183 cm). Overlap: 6.5″ (16.5 cm) at standard width of cut.
Deck Construction	10-gauge steel constructed chambers with 12-gauge welded reinforcements. 1.5″ (3.8 cm) square x 0.25″ (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16″ (0.48 cm) high-strength steel and 10-gauge exterior channels.
Drivetrain	Diesel
Electrical System	12-volt 585 CCA battery and 40 amp alternator
Engine Cooling	Liquid Cooled
Fuel / Power Source	Diesel / Biodiesel
Fuel Capacity	11 U.S. gal. (41.6 L)
Fuel Filter	Fuel filter/water separator
Gauges/Instrumentation	Fuel gauge and hour meter. Light cluster with check engine and charge indicator lights. Low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off).
Ground Clearance	6″ (15.3 cm)
Ground Following	6″ (15.3 cm) anti-scalp cups on each blade.
Ground Speed – Forward	0 – 9 mph (0 – 14 km/h)
Ground Speed – Reverse	0 – 4 mph (0 – 6.4 km/h)
Height	76″ (193 cm) with ROPS
Height of Cut Range	0.75″ – 4″ (1.9 cm – 10.2 cm) in 0.25″ (0.6 cm) increments. 3-position 0.030″ (0.08 cm) incremental calibration
Hydraulic Cylinders	Open center, manual valves, gear pump hydraulic system
Hydraulic Fluid Capacity	3.5 U.S. gal. (13.2 L)
Hydraulic Fluid Type	Toro PX™ Extended Life Hydraulic Fluid
Interlocks	Traction pedal, operator presence in seat, PTO engage or disengage, and cutting deck mow or transport safety interlock switches. Parking break set prohibits movement through traction pedal.
Lighting	Optional
Main Frame/Chassis	Formed steel, welded steel and steel tubing
Max Slope Angle	Refer to operator’s manual.
Mowing Rate (Productivity)	Up to 4.1 acres/hr (1.7 hectacres/hr)
Mowing Speed	0 – 6 mph (0 – 10 km/h)
Number of Blades	3
Oil Capacity	6.5 U.S. qt. (6.2 L)
Oil Cooler Description	Single pass, aluminum side-by-side oil cooler/radiator, 6.3 fins per inch, serpentine fin profile, 6.5 quart (6.1 liter) capacity.
Optional Accessories	Bimini Canvas Sunshade, LED Work Lights, Universal Sunshade (White or Red)
Overall Width	71.8” (182 cm) with standard 68” (173 cm) width of cut 75.8” (193 cm) with optional 72” (183 cm) width of cut
Parking/Service Brakes	Dynamic through hydrostatic transmission service brake. Hand actuated over center, drum type parking brake.
Power Steering	Yes
Power Train (Engine Description)	Kubota® 3-cylinder, liquid-cooled diesel. Power: 24.8 hp (18.5 kW) gross, at rated speed of 3000 rpm. Torque peak: 71.5 (52.7) Nm (lbs-ft) @ 2200 rpm. Displacement: 1123cc. EPA Tier IV Final and Stage V Compliant.
Product Length	116″ (295 cm)
Rollers	Standard full-length striping rear rollers on each deck
Safety/Operator Safety	Two post ROPS, seat belt and slope indicator standard
Seat	Two-piece premium commercial two-tone grey vinyl with two armrests, fore/aft adjustment
Sidewinder	Yes
Spindle Assembly	Ductile cast iron spindle housing. Dual greaseable tapered roller bearings. 1.25″ (3.2 cm) diameter solid cold finished steel spindle shaft. Splined connection between spindle shaft and deck motor. Welded blade retainer plus anti-scalp cups.
Starting	Key Start
Steering System Description	Hydraulic power steering, tilt wheel
Tires – Front	20″ x 12″ – 10″, 4-ply, Turf Tread
Tires – Rear	20″ x 10″ – 10″, 4-ply, Turf Tread
Tool Box	Standard
Traction Drive	3WD
Traction Drive (System)	3-wheel drive in mow and transport. Series/Parallel hydrostatic, closed-loop transmission provides infinitely variable ground speed in forward and reverse. Variable displacement piston type pump.
Transport Width	72.5″ (184 cm)
Weight	2,110 lbs. (957 kg) with cutting units
Wheelbase	59.5″ (151 cm)
Width of Cut	68″ (173 cm)

Call for Pricing

Similar Products

60V MAX* 30 in. (76 cm) eTimeMaster® Personal Pace Auto-Drive™ Lawn Mower w/ 10Ah + 5Ah + 2.5Ah Batteries (21493)

Dingo® 320-D Mini Skid Steer (22337CP)

GrandStand® 48 in. (122 cm) 22 hp 726 cc (California Model) (71504)

Groundsmaster® 3200 (31900A)

18 in. (46 cm) Power Clear® 518 ZE Electric Start Gas Snowblower (38475)

Greensmaster® 1021 (04830)

GrandStand® 60 in. (152 cm) 23.5 hp 726cc (72509)

ProLine H800 Direct Collect Mower 50” (127 cm) Cutting Width (31051)